.png)
.png){kind=logo}
IT TECH Central Gas Supply System
Gas Supply Components
Fitting to each customer’s needs GCE Druva and IT Tech offers a broad range of high-quality gas supply components, like Point Of Use (POU) regulators, valves and components. To fit each application, any type of furniture & fume hood connection is possible, from build-in to bench mounted and from hanging to wall-mounted. To ensure GCE Druva and IT Tech meets its customer needs, all models can be adapted to what is required or desired. This can be the complete POU layout, placement of gauge and actual design Druva works closely with its customers to ensure that our solutions always meet your needs!
GCE Druva offers a full range of Central Gas Control Solutions
Proper handling of expensive / toxic / flammable high purity gases requires highest quality control equipment. GCE Druva supplies a wide range of components to handle and control specialty gases. Based on many years of experience, GCE Druva is specialized in first and second stage pressure gas supply, tubing& tube layout, cylinder stock rooms, and monitoring devices.
LAB3100 SERIES
Our top of the line range with state of the art high-quality POU-regulators
Point-of-use regulators EMD 3100 - 6.0 Gas Purity
• Integrated shutoff function
• Brass, chrome-plated or stainless steel
• Inlet pressure: 40 bar / 600 psi
Outlet pressure:
• 0.2 – 1.5 / 0.2 – 4 / 0.5 – 6 / 0.5 – 10.5 bar
• 3 – 22 / 3 – 60 / 7 – 87 / 7 – 150 psi
Analysis Version:
• Inlet pressure: 12 bar / 170 psi
• Outlet pressure: 2.2/4.4 bar – 33/66 psi
DRUVA PUR MANIFOLDS
Single Source
Manifold used in gas supply systems for hazardous gases. The stainless steel version can also be used in gas supply systems for corrosive and / or toxic gases. Maximum gas purity is 6.0.This manifold allows only a discontinuous gas supply, every change of an empty bottle interrupts the gas flow.
Manual Changeover
Manifold used in gas supply systems for hazardous gases. The stainless steel version can also be used in gas supply sytems for corrosive and / or toxic gases. Maximum gas purity is 6.0.Manifolds with manual change over for continuous gas supply. Switching between empty and full gas cylinder by manual valve actuation.
Cylinder Regulator
Our cylinder regulators are used in combination with pressure gas cylinders for pure, inert, flammable, oxidizing, toxic and corrosive gases and gas mixtures. Maximum gas purity is 6.0.
STAINLESS STEEL ONLY
• HP triple purge block
• HP triple purge block + LP shut-off valve
• Triple purge block + LP regulating valve
BRASS CHROME PLATED + STAINLESS STEEL
• Standard version• LP shut-off valve
• LP regulating valve• HP purge valve
• HP purge valve + LP shut-off valve
• HP purge valve + LP regulating valve
Line Regulator
High, low and absolute pressure
Our line regulators are used in gas supply systems for pure, inert, flammable, oxidizing, toxic and corrosive gases and gas mixtures. Maximum gas purity is 6.0.According to the best of our knowledge, we assure that our new series fully meets all requirements of main international standards like ISO 7291.
Available as:
• High Pressure Regulator (H0)
• Low Pressure Regulator (LV)
• Absolute Pressure Regulator (AV)
Advantage of choosing GCE Druva central gas system components:
- A consistent compliance with current international standards
- Type test of our brass pressure regulators in accordance with ISO 7291 including the corresponding O2 ignition test
- Type test of our stainless-steel pressure regulators for manifolds in accordance with ISO 7291. The corresponding O2 ignition test will soon be carried out.
- Type test of our brass shut-off valves in accordance with ISO 10297 including the corresponding O2 ignition test for main shut-off valves.
- Type test of our stainless-steel shut-off valves in accordance with ISO 10297. The corresponding O2 ignition test will soon be carried out.
- Electrostatic chargeability test of plastic parts according to EN 13463-1
- Special design for optimal control characteristics and long life cycle of out regulators
- Spring damping system
- Encapsulated valve design of our pressure regulators
- Easy fix, 2-piece installation plate
- Separate mounting of ground plate (Without weight of the manifold)
- Easy mounting of manifold to ground plate and fixing with one screw only
- Replacement of pressure gauges without dismantling of the entire manifold
- Grounding screw on the plates
- Spring hook on our plates for cylinder connection hoses
Druva Pur - IT Tech's preferred partner:
- Focus on quality, durability, ease of use & safety
- High end materials 316L, Hastelloy, Elgiloy
- Specially cleaned and assembled pressure gauges (ECD quality)
- Single source supply–concept, system design, products, installation, after sales service
- Highly experienced application specialists for best of class support
- Complete & fully certified product portfolio
- For inert, reactive, flammable, oxidizing gases and gas mixtures, purity max 6.0
- Design & manufacturing in Europe
IT Tech is a specialised laboratory gas piping design and installation partner with many project references ranging across most industries. We are proud to be partnering with GCE Druva for their gas components and other suppliers for the whole installation process (pipes, tubes, fittings etc).
This article is cited from GCE Druva.
Products You may Like
Check out other IT- Tech product that suit your taste
Line regulators
Precision gas control in high-pressure systems - compact design, Hastelloy diaphragm, and electrostatic chargeability-tested line regulator.
Stainless steel cylinder regulators
Secure gas control with our Stainless Steel Cylinder Regulators - precision settings, diaphragm valve, and ATEX conformity.
Manual changeover panels
Secure gas supply with our Manual Changeover Panels—continuous flow, precise control, and modular design for flexibility.
Subscribe to our newsletter
Stay updated with IT-Tech Insights
Related posts
Check out other IT- Tech Scientific Resources
